Home ﹥ Products > • USB > USB to UART
UTS-TTL2VUI
The USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled with this adapter thru AP control. This adapter is perfect for embedded systems that require a serial connection to a computer. It shows up on any Windows computer as a standard serial COM port. Any application that talks to this COM port is automatically converting to USB and back to UART to your target unit. Drivers are available for Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1; Mac OS 8.6 / OS 9.x / OS 10.x, Linux , Win CE, Win Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher.
 |
Provides a USB to TTL Serial interface with various end connectors |
|
Enables to configure +3.3V or + 5V thru application program |
|
All in one solution for USB to asynchronous serial data transfer interface |
|
UART interface supports for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking |
|
Data transfer rates up to 3 Mbaud at TTL levels |
|
Transmitting and receiving LED indicators |
|
Supports +3.3V / 5V output to drive voltages optionally from +3.3V to +5V TTL inputs and delivers signal to target MCU |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 6 Pin Header | ||||||||
| Power Mode | Bus Powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
 |
 |
 |
 |
 |
|
UTS-TTL5P
This USB to Serial UART (TTL level) adapter. It allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled within this adapter. There is no other device or programming required. The adapter is perfect for embedded systems that require a serial connection to a computer. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to UART to your target board. Drivers are available for Windows 98SE/ME/2000/XP/Vista/7, Mac OS 8.6/OS 9/OS X, Linux, Win CE, Win Server 2003, Win Server 2008, and later versions are supported.
|
The Cable provides a USB to TTL Serial interface with various end connectors |
|
Single board USB to asynchronous serial data transfer interface |
|
Entire USB protocol handled by the electronics in the cable USB |
|
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On/X-Off software handshaking |
|
Data transfer rates from 300 baud to 3 Mbaud at TTL levels |
|
Cable features voltage reference input for setting UART signaling levels |
|
Transmit and receive LEDs |
|
UHCI/OHCI/EHCI host controller compatible |
|
Low USB bandwidth consumption. |
| Chips | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 5 Pin Header | ||||||||
| Power Mode | Bus powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
 |
|
 |
|
|
UTS-TTL5VT
The USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled with this adapter without application programmer. This adapter is perfect for embedded systems that require a serial connection to a computer. It shows up on any Windows computer as a standard serial COM port. Any application that talks to this COM port is automatically converting to USB and back to UART to your target unit. Drivers are available for Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1; Mac OS 8.6 / OS 9.x / OS 10.x, Linux , Win CE, Win Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher.
|
Provides a USB to TTL Serial interface with various end connectors |
|
Entire USB protocol handled by the electronics in the cable USB |
|
All in one solution for USB to asynchronous serial data transfer interface |
|
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On/X-Off software handshaking |
|
Data transfer rates up to 3 Mbaud at TTL levels |
|
+5V output allows external logic to be powered from the USB port |
|
Transmitting and receiving LED indicators. |
|
UHCI / OHCI / EHCI host controller compatible |
| Chips | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 6 Pin Header | ||||||||
| Power Mode | Bus powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
|