RJ-45 8P8C Male

UTS-485UI

USB to RS-485 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-485 peripherals such as POS and Industrial Control devices. USB to RS-485 adapter allows configuring such as Echo through application software. Termination Resistors and Bias can be set as good solution for saving time without manual setting. It supports USB Plug and Play; and serial port expansion. No IRQ, DMA, or I/O port resources required.

UTS-485UI更新報價如下，RoHS & REACH 報告請連結下載 https://www.hungturn.com.tw/DL/UTS-485UI_Report.rar，謝謝

Echo mode/Bias resister/Terminal resister set up by Windows application program, Mac or Linux OS compliant.

Supports Data transfers rate Up to 3M Baud

Supports plug and play and hot swapping function

No external power supply required

Supports ±15Kv ESD protection (HBM)

Allows single unit connecting up to 32 devices on the network

Fully Compliant with USB specification 1.1 and 2.0

Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher.

	Chip			FTDI

	Data Transfers Rate			Up to 3M Baud

	USB Specification			USB 1.1 / 2.0 compliant

	Connector Upstream			USB Type A Male

	Connector Device			8P8C RJ-45 Male

	Cable Length			1.8 m

	Power Mode			Bus powered

	Housing			Plastic

	Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x or later
	Linux OS: 1.5.0 or later