RS-232 Over Ethernet

STE-232

The STE-232 is an Ethernet to RS-232 Serial Bridge. It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, etc., to an Ethernet network. It allows bi-directional communication between the two. It operates as both a network server and a client, which means it is able to both initiate and accept network connections. Once a network connection is made, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices. The bridge can send and receive both UDP and TCP packets.

Supports TCP/IP, UDP/DHCP and HTTP protocols

Allows up to twelve (12) simultaneous TCP-IP network connections

Transmission rate up to 230 Kbps

Supports software handshaking (XON/XOFF) and hardware handshaking (RTS/CTS)

Multiple Bridges can be used on the same network

Integrated 802.3 compliant 10/100 Mbps network interface

RS232, DB9M 9-pin serial port connection

Supports Windows OS 98SE/2000/XP/Vista/7/8/8.1/10 or higher

Supports Windows server 2003/2008/2008R2/2012/2012R2 or higher

	Model No.			STE-232

	Baud Rate			230 kbps

	Connector Ethernet			RJ-45 Female

	Connector RS-232			DB-9 Male

	Ethernet			10/100 Mbps, Auto-select 10BaseT or 100BaseTX

	Configuration			SLAN Utility, Serial Console

	Flow Control			RTS/CTS (Hardware) XON/XOFF (Software)

	Power Consumption			DC 5V / 1A

	Housing			Plastic

	Dimension ( L x W x H )			66 x 39 x 20mm

	Windows OS: 98SE/2000/XP/Vista/7/8/8.1/10 or higher
	Windows server: 2003/2008/2008R2/2012/2012R2 or higher

See Larger Image

BTS-100V1

This BT RS-232 dongle is an ideal solution for cable replacement. It connects serial printers, serial scanners, or other device to a computer by remote up to 100 meters (300ft) away. Free to place device anywhere one like without modifying the environment for wire layout. This BT RS-232 dongle can be operated with PDA, computers, laptops, and smart phones/tablets that support BT RFCOMM profile and BT generic access profile. As such, it is ideal for use in applications where a PDA or laptop could communicate with another device (SBC, RTU, sensor, robot, radio, PBX) wirelessly.

N.B. *1. The CD utility only can be operated and compliant with Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher. It is not applicable to operate on iOS/Mac OS or Linux.

*2. For the compatibility, the BT pairing is not applicable to operate on iOS devices such as iPhone, iPad etc.

Extremely easy to install and use.

No need of external host and software

Supports up to 100 meters (300ft) distance (Open space, Line of site)

Standard Bluetooth Specification Version 2.1

Frequency 2402 ~ 2480MHz

Supports Baud Rate 9.6/19.2/38.4/57.6/115.2/230.4 kbps

Modulation GFSK-1 Mbps, DQPSK-2 Mbps, and 8-DPSK-3 Mbps

DTE/DCE mode switching

Supports no External power requirement on condition of connecting to a host that has assigned DC5V power on the pin 9 of its DB-9 end.

	Frequency			2402 to 2480MHz

	Connector			DB-9 Male

	Standard			BT specification version 2.1

	Tx Power			Max.13 dBm ( Class 1 )

	Rx Sensitivity			-86 dBm typical

	Power consumption			DC5V

	Baud Rate			9.6 / 19.2 / 38.4 / 57.6 /115.2 / 230.4 kbps

	Modulation			GFSK-1 Mbps, DQPSK-2 Mbps, and 8-DPSK-3 mBPS

	LED DTE/DCE			DTE: Blue / DCE: Green

	LED TX			Orange x 1

	LED RX			Green x 1

	Housing			Plastic

	Dimension (L x W x H)			66 x 39 x 20mm