USB-1024BC-ECO
The 10-Port Charging hub is a solution for quick charging up to 10 iPads, iPhones iPods and USB charging devices operating simultaneously. Also provides you a safe and secure facility for large capacity USB station in-house that supports Over-voltage, Over-current & Short circuit protections. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
 |
 |
 |
 |
 |
|
USB-220CH
USB-220CH is a 20-Port USB Hub with Charger, a solution for charging or sync of several iPads, iPhones iPods and USB charging devices operating simultaneously this is a perfect tool to eliminate the jumble of wires and chargers and also is ideal for large capacity USB station in-house for automated duplication tasks. Places such as school’s class room, businesses conference or meeting in organizations.
N.B.-We do not make any warranties regarding the accurate operation of this charger unit if the end user presumes to install the charging software like 'AI Charger' on computer for expanding the output current of charger unit.
N.B.-We do not make any warranties regarding the accurate operation of this charger unit if the end user presumes to install the charging software like 'AI Charger' on computer for expanding the output current of charger unit.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
 |
|
.jpg) |
USB-210CH
USB-210CH is a 10-Port USB Hub with Charger, a solution for charging or sync of several iPads, iPhones iPods and USB charging devices operating simultaneously this is a perfect tool to eliminate the jumble of wires and chargers and also is ideal for large capacity USB station in-house for automated duplication tasks. Places such as school’s class room, businesses conference or meeting in organizations.
|
Charges or syncs up to 10 iPads, iPods, iPhones or other USB-charged in charge mode devices, providing each USB port with the optimum charge level for each device |
|
Will also charge virtually any other device that can be charged through a powered USB port |
|
Supports High Speed 480Mbps, full speed 12Mbps and low speed 1.5Mbps operation |
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Ten (10) Hi-Speed USB 2.0 downstream ports |
|
Supports Over-current detection and protection |
|
Supports Surge protection, part ESD Protection (only for the DC contact with power supply) |
|
Extends up to optimum 20 USB devices by connecting cascade port with another USB 2.0 charge hub(s); to see the notes in the spec. file |
|
Supports Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10; Mac OS 8.6/9.x/10.x or higher |
| Chip | Terminus | ||||||||
| Speed | 480/12/1.5 Mbps | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Current per Port | 5VDC 2.4 A | ||||||||
| Connector Upstream | USB B Female | ||||||||
| Connector Downstream | USB A Female x 10 | ||||||||
| Cascade | USB A Female | ||||||||
| Power Mode | External power adapter | ||||||||
| LED Charge Mode | Red Color x 10 | ||||||||
| LED SYNC Mode | Orange Color x 10 | ||||||||
| Cable Length | 1.8m | ||||||||
| Dimension (L x W x H ) | 268 x 102 x 40 mm | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
.jpg) |
USB-2024BC ~New~
The 20-Port Charging hub is a solution for quick charging or sync up to 20 iPads, iPhones iPods and USB charging devices operating simultaneously; this is a perfect tool to effectively perform Sync/Charge Mode switching. Also is ideal for large capacity USB station in-house that enables charging and syncing at a time. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
.jpg) |
USB-1524BC
The 15-Port Charging hub is a solution for quick charging and/or sync up to 15 iPads, iPhones iPods and USB charging devices operating simultaneously; this is a perfect tool to effectively perform Sync/Charge Mode switching. Also is ideal for large capacity USB station in-house that enables charging and syncing at a time. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
.jpg) |
USB-1024BC ~New~
The 10-Port Charging hub is a solution for quick charging or sync up to 10 iPads, iPhones iPods and USB charging devices operating simultaneously; this is a perfect tool to effectively perform Sync/Charge Mode switching. Also is ideal for large capacity USB station in-house that enables charging and syncing at a time. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
.jpg) |
USB-0824BC
The 8-Port Charging hub is a solution for quick charging or sync up to 8 iPads, iPhones iPods and USB charging devices operating simultaneously; this is a perfect tool to effectively perform Sync/Charge Mode switching. Also is ideal for medium capacity USB station in-house that enables charging and syncing at a time. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
 |
USB-CH12TC ~New~
The 12-Port USB Type C Hi-Power Charging Station is a solution for quick charging up to 12 USB Type C devices. This is a perfect tool to effectively save energy and cool down the unit’s heat. Also is ideal for large capacity USB station in-house that enables charging at a time; automatically recharging once the devices connected have consumed their power with remaining 90% (approximately) after fully charged. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 9.x/10.x or higher |
|
Linux OS |
|
|
|
|
|
|
USB-2012TC ~New~
The USB 2.0 12-Port Type C Hi-Power Charging Hub is a solution for quick charging or sync up to 12 USB Type C devices. This is a perfect tool to effectively save energy and cool down the unit’s heat. Also is ideal for large capacity USB station in-house that enables charging and syncing at a time; automatically recharging once the devices connected have consumed their power with remaining 90% (approximately) after fully charged. Places such as school’s classroom, businesses conference or meeting in organizations.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 9.x/10.x or higher |
|
Linux OS |
|
|
|
|
|
|
UPC-100
UPC-100 is an USB to Printer adapter which offers user single parallel port connection. Users are able to connect a printer through the USB port on their system.
|
Truly Bi-directional communication between PC and printer |
|
Instantly adds a CN-36 male port to your USB equipped PC or laptop |
|
Fully Plug and Play compatible |
|
Supports over 1Mbps data transfer rate |
|
Fully compliant with USB specification 1.1 and 2.0 |
|
USB bus powered |
|
Low power consumption |
| Chip | Prolific | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Host | USB Type A Male | ||||||||
| Connector Device | CN-36/M | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE / ME / 2000 / XP / VISTA / 7 / 8 / 8.1 / 10; Windows Server 2003 / Server 2003 R2 (no driver required except 98SE) |
|
Mac OS and Linux OS with built-in USB printer class device driver |
|
*Connecting printer devices may require additional printer driver for installation. |
 |
 |
|
.jpg) |
|
|
UDA-200
UDA-200 turns and converts any USB port into audio ports, allowing users to connect their Speakers and Microphone when there are no audio ports available on their PC or Laptop Computers. It offers one the most convenient connectivity when both Vocal and Audio ports are in demand.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports AES/EBU, IEC60958, & S/PDIF Consumer Formats for stereo Pulse-code Modulation (PCM) audio |
|
Supports Hot-Swapping for a Quick Switch in Audio Device without Shutting Down your PC |
|
Supports suspend and Resume Power Management |
|
Supports Plug-and-play |
|
Mute Function |
|
Supports Bus Powered Mode |
| Chip | C-Media | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector USB | Type A Male | ||||||||
| Connector Device | 3.5mm Audio Jack x 2 | ||||||||
| Device Feature | Line-out/Microphone | ||||||||
| Mute | Slide Switch | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 0.2 m | ||||||||
| System Complaint | Window & Mac | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
|
|
|
UDA-501
This product adopts PCM (Pulse-Code Modulation) sampling technology to digitize audio analog signals. It receives audio stream from PC via USB interface and transmits audio data according to the consumer interface standards in digital playback mode. It enable USB HID (Human Interface Device) to work, and provide what the source offer in. 2.1 or 5.1 channel audio to Listen CD or on-line music, enjoy DVD movies or concerts as well as watching TV programs will be most suitable by using this adapter.
|
Fully compliant with USB specification 1.1 and 2.0 |
|
USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant |
|
Supports USB remote wake-up; Plug-and-play |
|
Supports 48/44.1 KHz sampling rate for playback |
|
Compatible with Win XP / Vista / 7 / 8 / 8.1 / 10; Mac O/S 10.x or higher |
|
Supports 5.1 channels for analog playback in the analog playback mode |
|
LED indication for power-on (red) and operation (green) |
| Chip | C-MEDIA | ||||||||
| Data Speed | 12/1.5 Mbps | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | Audio Jack x 3 | ||||||||
| Cable | 1m | ||||||||
| Power Mode | Bus powered | ||||||||
| LED | 3 | ||||||||
| Housing | Plastic | ||||||||
| Dimension (L x W x H) | 73 x 52 x 23 mm | ||||||||
|
Windows OS: XP/Vista/7/8/8.1/10 |
|
Mac OS: 10.x or higher |
|
|
|
|
|
.jpg) |
USB-242
USB 2.0 switching hub offers a most cost, time, convenience, and efficiency-effective way to let two PC users co-use least 4 peripheral devices, like printer, scanner, card reader, CD burner, etc. Through USB connection, the friendly sharing environment is easily achieved.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides 4 high-speed down-stream device ports and 2 hosting ports |
|
Supports 480/12/1.5 Mbps data transfer modes |
|
Supports simultaneous operating with multiple devices |
|
Hot-swapping and plug and play |
|
Automatically select self or bus-power mode |
|
Over-current detection and protection on each down-stream ports |
| Chip | NEC | ||||||||
| Speed | 480/12/1.5 Mbps | ||||||||
| LED | 5 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type B Female x 2 | ||||||||
| Connector Down stream | USB Type A Female x 4 | ||||||||
| PC Selection | Slide switch | ||||||||
| Power Mode | Bus powered or external power adapter | ||||||||
| Power Consumption | DC 6V2.1A | ||||||||
| Cable Length | 1.8 m | ||||||||
| Dimension (LxWxH) | 105 x 50 x 21 | ||||||||
|
Windows OS: ME/2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 8.6/9.x/10.x or higher |
|
|
|
|
|
.jpg) |
USB-240SL
The USB 2.0 hub features the function of an external bus and enables to provide4 downstream facing ports; each single port can be used to connect up to 127 peripheral devices and supports data transfer rate up to 480Mbps. This product features its compact size and strong compatibility. It can well collaborate with both portable and desktop computers to communicate with a wide sort of USB 2.0/1.1 enabled devices such as hub, scanner, digital camera, printer, removable drive, PC video camera, modem, USB flash drive, card reader and more.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports self & bus powered mode, hot plug & play |
|
One LED to indicate the hub is power-on |
|
Supports simultaneous operation of multiple USB 2.0 devices |
|
Supports high speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data transfer modes and auto recovery |
|
Compatible OS: Windows 98SE / ME / 2000 / XP / Vista / 7/ 8 / 8.1 / 10, Mac OS 8.6/ 9.x / 10.x or higher |
| Chip | NEC | ||||||||
| Speed | 480/12/1.5 Mbps | ||||||||
| LED | 1 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Mini B Female | ||||||||
| Connector Downstream | USB Type A Female x 4 | ||||||||
| Cable Length | 1m | ||||||||
| Power Mode | Bus powered or external power adapter | ||||||||
| Power Consumption | DC 5V2A | ||||||||
| Dimension (LxWxH) | 82 x 37 x 11 mm | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or later |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
|
|
|
USB-240SLb
The USB 2.0 hub features the function of an external bus and enables to provide 4 downstream facing ports; each single port can be used to connect up to 127 peripheral devices and supports data transfer rate up to 480Mbps. This product features its compact size and strong compatibility. It can well collaborate with both portable and desktop computers to communicate with a wide sort of USB 2.0/1.1 enabled devices such as hub, scanner, digital camera, printer, removable drive, PC video camera, modem, USB flash drive, card reader and more.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or later |
|
Mac OS: 8.6/9.x/10.x or later |
|
|
|
.jpg) |
|
|
UTS-31TBi
The Isolated USB to serial interface adapter features 2.5kV isolation to ensure these serial devices via the terminal block wired require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. All configuration and electrical interface selections are handled through the driver, eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232, RS-422, and RS-485 with the electrical interface settings maintained locally, allowing the host computer to be repaired or upgraded without reconfiguring the serial port. Additionally, the isolated adapter can be configured at one computer and deployed to other computers.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6/9.x/10.x; Linux Kernel 1.5.0 or higher |
|
|
|
|
|
.jpg) |
UTS-431DBi
The Isolated USB to 4-Port serial interface adapter features 2.5kV isolation to ensure 4 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. All configuration and electrical interface selections are handled through the driver, eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232, RS-422, and RS-485 with the electrical interface settings maintained locally, allowing the host computer to be repaired or upgraded without reconfiguring the serial port. Additionally, the isolated adapter can be configured at one computer and deployed to other computers.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Enables to configure RS-232 / RS-422 / RS-485 (Echo mode / Bias resister / Terminal resister) thru application programmer of Windows OS. |
|
Data transfer rate up to 230 kbps (RS-232) ~ 3 M Baud Rate (RS-422 or RS-485) |
|
Supports 2.5kV Isolation; Bus powered, no external power required |
|
Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops |
|
Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection |
|
Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6, Linux 1.5.0 or higher |
|
Rugged & cambered Aluminum shell and wall mountable |
| Model No. | UTS-431DBi | ||||||||
| Chip | FTDI | ||||||||
| Data Rate RS-232 | 230 Kbps | ||||||||
| Data Rate RS-422 / RS-485 | 3 M Baud Rate | ||||||||
| LED | 9 ( 4TX / 4RX / ACT ) | ||||||||
| Connector Host | USB Type B Female x 1 | ||||||||
| Connector Serial Out | DB-9 Male x 4 | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Operating/Storage Temperature | -40 to 85°C (-40 to 185°F) | ||||||||
| Power Mode | Bus Powered | ||||||||
| Housing | Aluminum | ||||||||
| Dimension ( L x W x H ) | 170 x 94.5 x 30mm | ||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6/9.x/10.x; Linux Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-231DBi
The Isolated USB to 2-Port serial interface adapter features 2.5kV isolation to ensure 2 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. All configuration and electrical interface selections are handled through the driver, eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232, RS-422, and RS-485 with the electrical interface settings maintained locally, allowing the host computer to be repaired or upgraded without reconfiguring the serial port. Additionally, the isolated adapter can be configured at one computer and deployed to other computers.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Enables to configure RS-232 / RS-422 / RS-485 (Echo mode / Bias resister / Terminal resister) thru application programmer of Windows OS. |
|
Data transfer rate up to 230 kbps (RS-232) ~ 3 M Baud Rate (RS-422 or RS-485) |
|
Supports 2.5kV Isolation; Bus powered, no external power required |
|
Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops |
|
Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection |
|
Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6, Linux 1.5.0 or higher |
|
Rugged & cambered Aluminum shell and wall mountable |
| Model No. | UTS-231DBi | ||||||||
| Chip | FTDI | ||||||||
| Data Rate RS-232 | 230 Kbps | ||||||||
| Data Rate RS-422 / RS-485 | 3 M Baud Rate | ||||||||
| LED | 5 ( 2TX / 2RX / ACT ) | ||||||||
| Connector Host | USB Type B Female x 1 | ||||||||
| Connector Serial Out | DB-9 Male x 2 | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Operating/Storage Temperature | -40 to 85°C (-40 to 185°F) | ||||||||
| Power Mode | Bus Powered | ||||||||
| Housing | Aluminum | ||||||||
| Dimension ( L x W x H ) | 130 x 74 x 30mm | ||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6/9.x/10.x; Linux Kernel 1.5.0 or higher |
|
|
|
|
|
.jpg) |
UTS-31DBi
The Isolated USB to serial interface adapter features 2.5kV isolation to ensure these serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. All configuration and electrical interface selections are handled through the driver, eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232, RS-422, and RS-485 with the electrical interface settings maintained locally, allowing the host computer to be repaired or upgraded without reconfiguring the serial port. Additionally, the isolated adapter can be configured at one computer and deployed to other computers.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6/9.x/10.x; Linux Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-1231DB
The Industrial USB to 12-Port serial interface adapter ensures 12 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. All configuration and electrical interface selections are handled through the driver, eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232, RS-422, and RS-485 with the electrical interface settings maintained locally, allowing the host computer to be repaired or upgraded without reconfiguring the serial port. Additionally, the isolated adapter can be configured at one computer and deployed to other computers.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6/9.x/10.x; Linux Kernel 1.5.0 or higher |
|
|
|
|
|
|
UDS-3C41
The intelligent USB 3.0 Data Switch allows you sharing a single USB 3.0 peripheral with 4 different computer systems, avoiding the cost of purchasing duplicate peripherals or the hassle of swapping cables from one system to the others. This unit delivers speed and flexibility, with simple push-button controls for switching between computers, and supports Super Speed USB bandwidth (up to 5 Gbps) ensuring fast data transfers to/from your shared peripheral device. The switch is also backward compatible with USB 2.0/1.1 (480Mbps, 12Mbps respectively), so you don't have to worry about your computer or older peripherals not performing. The switch can also be connected to a USB hub, to expand the number of devices you can share between the 4 connected systems, or to a USB drive enclosure or docking station, for a shared external storage solution.
|
USB 3.0 data transfer rates up to 5 Gbps |
|
Fully Compliant with USB specification 1.1, 2.0 and 3.0 |
|
Push-button controls for switching between computers |
|
By bus powered, no additional power adapter required |
|
Compatible OS thru USB 2.0: Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Mac OS 8.6 or higher |
|
Compatible OS thru USB 3.0: Windows XP / Vista / 7 / 8 / 8.1 / 10; Mac OS X Mountain Lion or higher |
|
Plug-and-Play, no software or drivers required |
| Data Transfer Rate | 1.5M / 12M / 480M / 5G bps | ||||||||
| LED | 4 | ||||||||
| PC Selector | Push button | ||||||||
| USB Specification | USB 1.1/2.0/3.0 compliant | ||||||||
| Connector Upstream | USB 3.0 B Female x 4 | ||||||||
| Connector Downstream | USB 3.0 A Female | ||||||||
| Power Mode | Bus powered | ||||||||
| Extension Cable Length-Input | Max. 2m | ||||||||
| Extension Cable Length-Output | Max.1m | ||||||||
| Housing | Plastic | ||||||||
| Dimension (L x W x H) | 95 x 69 x 26 mm | ||||||||
|
Compatible OS thru USB 2.0: Windows 98SE/ME/2000/XP/Vista/7/8/8.1/10 or higher |
|
Compatible OS thru USB 3.0: Windows XP/Vista/7/8/8.1/10 or higher |
|
Mac OS 8.6/9.x/10.x or higher |
|
|
|
|
|
|
UDS-3C21
The intelligent USB 3.0 Data Switch allows you sharing a single USB 3.0 peripheral with 2 different computer systems, avoiding the cost of purchasing duplicate peripherals or the hassle of swapping cables from one system to another. This unit delivers speed and flexibility, with simple push-button controls for switching between computers, and supports Super Speed USB bandwidth (up to 5 Gbps) ensuring fast data transfers to/from your shared peripheral device. The switch is also backward compatible with USB 2.0/1.1 (480Mbps, 12Mbps respectively), so you don't have to worry about your computer or older peripherals not performing. The switch can also be connected to a USB hub, to expand the number of devices you can share between the two connected systems, or to a USB drive enclosure or docking station, for a shared external storage solution.
|
USB 3.0 data transfer rates up to 5 Gbps |
|
Fully Compliant with USB specification 1.1, 2.0 and 3.0 |
|
Push-button controls for switching between computers |
|
By bus powered, no additional power adapter required |
|
Compatible OS thru USB 2.0: Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10, Mac OS 8.6 / 9.x / 10.x or higher |
|
Compatible OS thru USB 3.0: Windows XP / Vista / 7 / 8 / 8.1 / 10, Mac OS X Mountain Lion or higher |
|
Plug-and-Play, no software or drivers required |
| Data Transfer Rate | 1.5M/12M/480M/5G bps | ||||||||
| LED | 2 | ||||||||
| PC Selector | Push Button | ||||||||
| USB Specification | USB 1.1/2.0/3.0 compliant | ||||||||
| Connector Upstream | USB 3.0 B Female x 2 | ||||||||
| Connector Downstream | USB 3.0 A Female | ||||||||
| Power Mode | Bus powered | ||||||||
| Extension Cable Length-Input | Max. 2 m | ||||||||
| Extension Cable Length-Output | Max. 1 m | ||||||||
| Housing | Plastic | ||||||||
| Dimension (L x W x H) | 95 x 69 x 26 mm | ||||||||
|
Compatible OS thru USB 2.0: Windows 98SE/ME/2000/XP/Vista/7/8/8.1/10 or higher |
|
Compatible OS thru USB 3.0: Windows XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 8.6/9.x/10.x or higher |
|
|
|
|
|
|
UTS-101E
The USB to RS-232 CAT5 extender is a low cost hardware solution that will extend your RS-232 (serial / DB-9) using a single standard CAT5/CAT5e/CAT6 UTP cable. It provides full-duplex remote access and control of any RS-232 protocol device. The USB to RS-232 CAT5 extender kit consists of a local transmitter and remote receiver. It provides you with a tremendous amount of flexibility in your installation. You can place RS-232 devices in any location you want and control them remotely up to 90 meters (270 feet)
|
Compatible with all RS-232 protocols |
|
Extends RS-232 peripherals up to 90 meters |
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports transfer rate up to 230kbps |
|
Supports ±15kV HBM ESD protection |
|
Bus-powered - no external power supply required for local or remote unit |
| Connector Transmitter Host | 15 cm USB cable with USB Type A Male | ||||||||
| Connector Transmitter Output | RJ-45 Female | ||||||||
| Connector Receiver Input | RJ-45 Female | ||||||||
| Connector Receiver Device | DB-9 Male | ||||||||
| Interconnection Cable | Standard Cat. 5/5e/6 | ||||||||
| LED Transmitter | 1 (Power) | ||||||||
| LED Receiver | 3 (TX/Power/RX) | ||||||||
| Power Mode | Bus powered | ||||||||
| Dimension(L x W x H) | 66 x 39 x 20 mm | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2 or higher |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
WinCE OS: V4.2 ~ V7.0 |
|
|
|
|
|
.jpg) |
UTS-i102
The Isolated USB to 2-Port RS-232 Cat.5 extender is a low cost and durable serial solution that will extend your RS-232 via a single standard Cat.5 / 5e / 6 UTP cable. It features 2.5kV isolation to ensure sensitive controls and devices for long extending serial signal won’t be damaged. The Extender set provides full-duplex remote access and control of any RS-232 protocol device. The isolated USB to 2-Port RS-232 Cat.5 extender kit consists of a local transmitter and 2 remote receivers. Allows you placing RS-232 devices in any location you want and to control them remotely up to 2000 meters (6600 feet).
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3/Vista/7/8/8.1/10 or higher |
|
Windows Server 2003/2008/2008R2/2012/2012R2 or higher |
|
Mac OS 8.6/9.x/10.x or higher |
|
Linux Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-i101
The Isolated USB to RS-232 Cat.5 extender is a low cost and durable serial solution that will extend your RS-232 via a single standard Cat.5 / 5e / 6 UTP cable. It features 2.5kV isolation to ensure sensitive controls and devices for long extending serial signal won’t be damaged. It provides full-duplex remote access and control of any RS-232 protocol device. The isolated USB to RS-232 Cat.5 extender kit consists of a local transmitter and remote receiver. Allows you placing RS-232 devices in any location you want and to control them remotely up to 2000 meters (6600 feet).
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3/Vista/7/8/8.1/10 or higher |
|
Windows Server 2003/2008/2008R2/2012/2012R2 or higher |
|
Mac OS 8.6/9.x/10.x or higher |
|
Linux Kernel 1.5.0 or higher |
|
|
|
|
|
.jpg) |
US-102M
This product can help remove the distance barrier between your PC and any USB-enabled peripheral devices which are located at a distance exceeding up to 50 meters away. By using technology of ASIC (Application Specific Integrated Circuits) and other ICs plus features of Cat.5/5e/6 cables, distance is no longer a problem to hinder the inter-workability in your computing communication world.
|
Extends USB peripherals devices up to 100 meters for low-speed and 50 meters for full-speed |
|
Ideal for multi-touch monitors, whiteboards, webcams etc usage. |
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Low cost and high performance Cat.5/5e/6 network cable applied |
|
Embedded USB transceivers in both Master and Remote units to secure the transmitting quality |
|
One LED on each end to indicate the extender is power on |
|
Bus-powered - no external power supply required for local or remote unit |
|
No driver installation is required |
| Connector Master Upstream | 15 cm USB cable with USB Type A Male | ||||||||
| Connector Master Output | RJ45 Female | ||||||||
| Connector Remote Input | RJ45 Female | ||||||||
| Connector Remote Downstream | USB Type A Female- | ||||||||
| Interconnection Cable | Standard Cat.5/5e/6 | ||||||||
| LED | 2 (1 LED on either end) | ||||||||
| Power Mode | Bus power | ||||||||
| Housing/L x W x H | Molding (PVC)/32 x 21 x 20 mm | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
USB-E101
The USB 2.0 Extender is a low cost high performance that enables USB 2.0 connectivity over Cat. 5 / 5e / 6 at data rates up to 480Mbps; extends true USB up to 70m (230ft) over standard Cat. 5 cabling. Eliminates the 5 meters distance limitation of USB. Supporting all USB devices over a variety of media without the need of additional software driver and it is also a true plug-and-play solution, compatible with all leading operating systems that support USB device types from high-speed web cams, hard drives, printers, scanners, audio devices, touch screens, digital cameras and game controllers.
|
True plug and play, no driver installation required |
|
Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 70m (230ft) over Cat. 5 / 5e / 6 cables |
|
Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps |
|
Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, touch screens, web cams, and game controllers. |
|
Complies with Windows OS 2000/XP/Vista/7/8/8.1/10; Mac OS, Linux OS or higher |
|
Fully Compliant with USB specification 1.1 and 2.0 |
| Connector Transmitter Upstream | 15cm USB cable with USB Type A Male | ||||||||
| Connector Transmitter Output | RJ-45 Female | ||||||||
| Connector Receiver Input | RJ-45 Female | ||||||||
| Connector Receiver Downstream | USB Type A Female | ||||||||
| Interconnection Cable | Standard Cat.5/5e/6 | ||||||||
| Max. Cable Length | 70m (230ft) | ||||||||
| LED | 1 | ||||||||
| Housing | Plastic | ||||||||
| Dimension ( L x W x H ) | 66 x 39 x 20mm | ||||||||
| Power Mode | External power adapter for Rx | ||||||||
| Power Consumption | 5VDC 1A for Rx | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Operating Temperature | 0°C to 50°C | ||||||||
|
Windows OS: 2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 8.6/9.x/10.x or higher |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
.jpg) |
UTE-300B
UTE-300B is a Super-Speed USB 3.0 to Giga Ethernet adapter. With backward compatibility with USB 1.1/2.0 and LAN speed 10/100/1000 Mbps auto-negotiation capability, the adapter is specially designed to easily plug into an available USB port on a Desktop, Notebook and Ultrabook. UTE-300B provides a standard RJ-45 connector for a quick and simple method of connecting to an Ethernet 10/100/1000Mbps based LAN via a network hub or switch. The built-in USB 3.0 cable with type A Plug connects directly to your Desktop, Notebook or Ultrabook with USB 2.0 or 3.0 host. It also supports USB power saving with suspends/resume function to minimize system power consumption, which is especially useful for Notebook/Ultrabook users.
|
Compliant with USB specification 1.1, 2.0 and 3.0 |
|
USB 3.0 to 10/100/1000Mbps Giga Ethernet |
|
Supports all USB 3.0 power saving models |
|
Supports IEEE 802.3az (Energy Efficient Ethernet) |
|
IEEE 802.3, 802.3u, and 802.3ab compatible |
|
Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control. |
|
Supports advanced link down power saving during Ethernet cable is unplugged |
|
Supports Auto-Detach power saving. Soft-disconnected from USB host when Ethernet cable is unplugged |
|
Supports Windows OS XP/Vista/7/8/8.1/10; Linux OS 2.6.x/3.x, Mac OSX 10.6.x or higher |
| Model No. | UTE-300B | ||||||||
| Chip | ASIX | ||||||||
| Data Transfer Rates | 10/100/1000 Mbps ( Half/Full Duplex ) | ||||||||
| USB Specification | USB 1.1/2.0/3.0 compliant | ||||||||
| LED Indicators | Orange-Duplex; Red-Link; Green-Read/Write | ||||||||
| Connectors Host | USB 3.0 A Male | ||||||||
| Connectors Ethernet | 8P8C RJ-45 Female | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 0.15m | ||||||||
| Dimension ( L X W X H ) | 66 x 39 x 20 mm | ||||||||
|
Windows OS: XP/Vista/7/8/8.1/10 or higher |
|
Linux OS: Kernel 2.6.x/3.x or higher |
|
Mac OS: 10.6.x~10.10.x or higher |
|
|
|
|
|
|
USB-ISO101 ~Hot~
USB Isolator protects PC or Laptop while connecting USB peripherals which is wired to high voltage. This small, industrial - grade isolator is very easy to use and provides a high-voltage barrier protection against surges, noise and ground loop errors. It is suitable for use in sensitive applications like automotive measurements. USB isolator provides a high - voltage isolation barrier between computer and it’s connected USB device. The isolation protects equipment from electrical over-voltages and transient voltage spikes, by eliminating ground loop currents flowing between the PC and USB device which can cause damage and inaccurate measurements. Additionally, isolation minimizes conducted noise from static discharge, magnetic fields and radio frequency interference. USB isolator is USB bus powered and can provide 5V 300mA to your USB device with built-in isolated DC-DC converter. This is possible only when the isolator is connected to a high power USB host port.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or higher |
|
Mac OS: 8.6/9.x/10.x or higher |
|
|
|
|
|
.jpg) |
UTS-TTL2VUI
The USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled with this adapter thru AP control. This adapter is perfect for embedded systems that require a serial connection to a computer. It shows up on any Windows computer as a standard serial COM port. Any application that talks to this COM port is automatically converting to USB and back to UART to your target unit. Drivers are available for Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1; Mac OS 8.6 / OS 9.x / OS 10.x, Linux , Win CE, Win Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher.
|
Provides a USB to TTL Serial interface with various end connectors |
|
Enables to configure +3.3V or + 5V thru application program |
|
All in one solution for USB to asynchronous serial data transfer interface |
|
UART interface supports for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking |
|
Data transfer rates up to 3 Mbaud at TTL levels |
|
Transmitting and receiving LED indicators |
|
Supports +3.3V / 5V output to drive voltages optionally from +3.3V to +5V TTL inputs and delivers signal to target MCU |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 6 Pin Header | ||||||||
| Power Mode | Bus Powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-TTL5P
This USB to Serial UART (TTL level) adapter. It allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled within this adapter. There is no other device or programming required. The adapter is perfect for embedded systems that require a serial connection to a computer. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to UART to your target board. Drivers are available for Windows 98SE/ME/2000/XP/Vista/7, Mac OS 8.6/OS 9/OS X, Linux, Win CE, Win Server 2003, Win Server 2008, and later versions are supported.
|
The Cable provides a USB to TTL Serial interface with various end connectors |
|
Single board USB to asynchronous serial data transfer interface |
|
Entire USB protocol handled by the electronics in the cable USB |
|
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On/X-Off software handshaking |
|
Data transfer rates from 300 baud to 3 Mbaud at TTL levels |
|
Cable features voltage reference input for setting UART signaling levels |
|
Transmit and receive LEDs |
|
UHCI/OHCI/EHCI host controller compatible |
|
Low USB bandwidth consumption. |
| Chips | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 5 Pin Header | ||||||||
| Power Mode | Bus powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-TTL5VT
The USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication. All USB protocol is handled with this adapter without application programmer. This adapter is perfect for embedded systems that require a serial connection to a computer. It shows up on any Windows computer as a standard serial COM port. Any application that talks to this COM port is automatically converting to USB and back to UART to your target unit. Drivers are available for Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1; Mac OS 8.6 / OS 9.x / OS 10.x, Linux , Win CE, Win Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher.
|
Provides a USB to TTL Serial interface with various end connectors |
|
Entire USB protocol handled by the electronics in the cable USB |
|
All in one solution for USB to asynchronous serial data transfer interface |
|
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity |
|
Fully assisted hardware (RTS#/CTS#) or X-On/X-Off software handshaking |
|
Data transfer rates up to 3 Mbaud at TTL levels |
|
+5V output allows external logic to be powered from the USB port |
|
Transmitting and receiving LED indicators. |
|
UHCI / OHCI / EHCI host controller compatible |
| Chips | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 6 Pin Header | ||||||||
| Power Mode | Bus powered | ||||||||
| LED | 2 | ||||||||
| Cable Length | 1.8m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Win Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-200J2
UTS-200J2 provides an extra connection for RS-422 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate of up to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Chip | FTDI | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1M | ||||||||
| Interface | RS-422 | ||||||||
| LED | 3 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-200J
UTS-200J provides an extra connection for RS-422/485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| LED(s) | 3 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Power Mode | Bus powered | ||||||||
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Housing | Plastic | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Cable Length | 1M | ||||||||
| Interface | RS-422/485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
|
UTS-200J5
UTS-200J5 provides an extra connection for RS-485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
UTS-200系列 RoHS & REACH報告請連結下載https://www.hungturn.com.tw/webfiles/UTS-200JXS.rar .謝謝
UTS-200系列 RoHS & REACH報告請連結下載https://www.hungturn.com.tw/webfiles/UTS-200JXS.rar .謝謝
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Chip | FTDI | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1m | ||||||||
| Interface | RS-485 | ||||||||
| LED | 3 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485UI
USB to RS-485 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-485 peripherals such as POS and Industrial Control devices. USB to RS-485 adapter allows configuring such as Echo through application software. Termination Resistors and Bias can be set as good solution for saving time without manual setting. It supports USB Plug and Play; and serial port expansion. No IRQ, DMA, or I/O port resources required.
UTS-485UI更新報價如下，RoHS & REACH 報告請連結下載 https://www.hungturn.com.tw/DL/UTS-485UI_Report.rar，謝謝
UTS-485UI更新報價如下，RoHS & REACH 報告請連結下載 https://www.hungturn.com.tw/DL/UTS-485UI_Report.rar，謝謝
|
Echo mode/Bias resister/Terminal resister set up by Windows application program, Mac or Linux OS compliant. |
|
Supports Data transfers rate Up to 3M Baud |
|
Supports plug and play and hot swapping function |
|
No external power supply required |
|
Supports ±15Kv ESD protection (HBM) |
|
Allows single unit connecting up to 32 devices on the network |
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher. |
| Chip | FTDI | ||||||||
| Data Transfers Rate | Up to 3M Baud | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 8P8C RJ-45 Male | ||||||||
| Cable Length | 1.8 m | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or later |
|
Linux OS: 1.5.0 or later |
|
|
|
|
 |
|
UTS-485TB
USB to RS-485 adapter provides an extra serial COM port via USB connection and can be configured to work with RS-485 devices such as POS or industrially controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-485 data and control signals thru its terminal block. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without external power requirement.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 32 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher, Win CE, |
|
Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfer Rates | Up to 3M baud | ||||||||
| LED | 3 | ||||||||
| Host Port Connector | USB Type A Male | ||||||||
| Device Port Connector | Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Operating Temp. | 0 ℃ ~ 40 ℃ | ||||||||
| Storage Temp. | -20 ℃ ~ 60 ℃ | ||||||||
| Humidity | 0~80% RH, Non-condensing | ||||||||
| Interface | RS-485 | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-422TB
USB to RS-422 converter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. USB converter features a full set of RS-422 data and control signals on its terminal block connector. It supports data transfer rates of up to 3 Mbps. No external power supply is required as USB converter takes its power from the USB bus.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides four (4) Terminal Block Serial Port for Device Connection |
|
Data Transfer Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Short Circuit and Over-Current Protection |
|
Supports Bus Powered Mode |
| CHIP | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Connector Upstream | USB Type A/M | ||||||||
| Connector Downstream | Terminal Block x 5 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1m | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-422 | ||||||||
| LED | 3 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485X + DT485C
USB to RS-485 adapter provides an extra serial com port via USB connection and can be configured to work with RS-485 peripherals such as POS and industrial controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-485 data and control signals on its DB-9 or terminal block changer. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without requiring an external power adapter.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 256 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
|
Changer adapter from DB-9F to 5 Pins Terminal block |
| Chip | FTDI | ||||||||
| Data Transfers Rates | 300 to 3M baud | ||||||||
| Power Consumption | 56mA | ||||||||
| LED | 3 | ||||||||
| Environment Operating Temp | 0 ℃ ~ 40 ℃ | ||||||||
| Environment Storage Temp | -20 ℃ ~ 60 ℃ | ||||||||
| Environment Humidity | 0~80% RH, Non-condensing | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-485 | ||||||||
| Connector Host | USB Type A Male | ||||||||
| Connector Device | DB-9M/DB-9F to Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 or higher |
|
Windows server: 2003/2008/2008R2/2012/2012R2 or higher |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or higher |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-422X + DT422C
USB to RS-422 adapter provides an extra serial com port via USB connection and can be configured to work with RS-422 peripherals such as POS and industrial controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-422 data and control signals on its DB-9 or terminal block changer. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without requiring an external power adapter.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 256 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports the asynchronous serial interfaces |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Supports default ROM or external EEPROM for device configuration |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
|
Changer adapter from DB-9 to Terminal block |
| Chip | FTDI | ||||||||
| Data Transfers Rate | up to 3M baud | ||||||||
| Power Consumption | 56mA | ||||||||
| LED | 3 | ||||||||
| Environment Operating Temp. | 0 ℃ ~ 40 ℃ | ||||||||
| Environment Storage Temp. | -20 ℃ ~ 60 ℃ | ||||||||
| Environment Humidity | 0~80% RH, Non-condensing | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-422 | ||||||||
| Connector Host | USB Type A Male | ||||||||
| Connector Device | DB-9 / Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 or higher |
|
Windows server: 2003/2008/2008R2/2012/2012R2 or higher |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or higher |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-M12 ~Hot~
UTS-M12 provides 2 extra connections for RS-422/485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Provides two (2) DB-9 Male Serial Port for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Chip | FTDI | ||||||||
| LED | 1 | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | DB-9/M x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Interface | RS-422/485 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Cable Length | 0.6m | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485 ~Hot~
UTS-485 provides an extra connection for RS-485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides one (1) DB-9 Male Serial Port for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| Chip | FTDI | ||||||||
| LED | 3 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Cable Length | 1.1M | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Housing | PVC | ||||||||
| Device Port Connector | DB-9/M x 1 | ||||||||
| Power Mode | Bus powered | ||||||||
| Interface | RS-485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-422 ~Hot~
USB to RS-422 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. USB adapter features a full set of RS-422 data and control signals on its terminal block connector. It supports data transfer rates of up to 3 Mbps. No external power supply is required as USB adapter takes its power from the USB bus.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces |
|
Data transfers rate 300 to 3M baud |
|
Supports remote wake-up and power management |
|
Supports default ROM or external EEPROM for device configuration |
|
The system is equipped with USB Host Controller |
| Chip | FTDI | ||||||||
| Data transfers Rate | 300 to 3M baud | ||||||||
| LED | 3 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-422 | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | DB-9 Male | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | PVC Molding | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-232X45
The USB to RS-232 Adapter is a low-cost, high-performance cable. It operates as a bridge and provides easy connectivity between a USB port and a serial port. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports asynchronous serial interfaces |
|
Supports data transfer rate up to 230 kbps |
|
Supports ±15kV HBM ESD protection |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher. |
| Model No. | UTS-232X45 | ||||||||
| Chip | FTDI | ||||||||
| Data Transfer Rate | Up to 230kbps | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 8P8C RJ-45 Male | ||||||||
| Cable Length | 1.8 m | ||||||||
| Power Mode | Bus Powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6 / 9.x / 10.x or higher |
|
Linux 1.5.0 or higher |
|
|
|
|
|
|
UTS-6232i
The Industrial Isolated 6-Port USB to RS-232 adapter features 2.5kV isolation to ensure 6 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply installs the drivers, connect the 6-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Additionally, the isolated adapter is bus-powered to eliminate the need for an external power adapter or wall outlet.
|
Full compliance with the USB Specification 2.0 & 1.1 |
|
Compatible with all RS-232 protocols |
|
Supports transfer rate up to 230 kbps |
|
Supports 2.5kV Isolation |
|
Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops |
|
Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection |
|
Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Mac OS 8.6, Linux 1.5.0 or higher |
|
Rugged & cambered Aluminum shell and wall mountable |
| Model No. | UTS-6232i | ||||||||
| Chip | FTDI | ||||||||
| Data Rate | 230 Kbps | ||||||||
| LED | 13 ( 6TX / 6RX / ACT ) | ||||||||
| Connector Host | USB Type B Female x 1 | ||||||||
| Connector RS-232 Out | DB-9 Male x 6 | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Operating/Storage Temperature | -40 to 85°C (-40 to 185°F) | ||||||||
| Power Mode | Bus Powered | ||||||||
| Housing | Aluminum | ||||||||
| Dimension ( L x W x H ) | 170 x 94.5 x 30mm | ||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6, Linux 1.5.0 or higher |
|
|
|
|
|
|
UTS-3232i
The Industrial Isolated USB to 3-Port RS-232 adapter features 2.5kV isolation to ensure 3 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply installs the drivers, connect the 3-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Additionally, the isolated adapter is bus-powered to eliminate the need for an external power adapter or wall outlet.
|
Full compliance with the USB Specification 2.0 & 1.1 |
|
Compatible with all RS-232 protocols |
|
Supports transfer rate up to 230 kbps |
|
Supports 2.5kV Isolation |
|
Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops |
|
Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection |
|
Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Mac OS 8.6, Linux 1.5.0 or higher |
|
Rugged & cambered Aluminum shell and wall mountable |
| Model No. | UTS-3232i | ||||||||
| Chip | FTDI | ||||||||
| Data Rate | 230 Kbps | ||||||||
| LED | 7 ( 3TX / 3RX / ACT ) | ||||||||
| Connector Host | USB Type B Female x 1 | ||||||||
| Connector RS-232 Out | DB-9 Male x 3 | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Operating/Storage Temperature | -40 to 85°C (-40 to 185°F) | ||||||||
| Power Mode | Bus Powered | ||||||||
| Housing | Aluminum | ||||||||
| Dimension ( L x W x H ) | 170 x 94.5 x 30mm | ||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6, Linux 1.5.0 or higher |
|
|
|
|
|
|
UTS-112
The Industrial 12-Port USB to RS-232 adapter features to ensure 12 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply install the drivers, connect the 12-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Maximum 48 serial devices can be connected under cascading 4 units.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Mac OS 8.6, Linux 1.5.0 or higher |
|
|
|
|
|
|
UMC-104 ~Hot~
The USB to 4 Ports RS-232 Adapter converts a single USB port into four RS-232 serial ports allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) A cost-effective but high performance, with metal (Aluminum) construction, it provides versatile connections and a robust solution for both harsh industrial environments (no IRQs requirement) and simple desktop installations.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces |
|
Supports data transfer rate up to 230 kbps. |
|
Supports remote wake-up and power-on-reset |
|
Supports ±15kV HBM ESD protection |
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Host Port Connector | USB Type B/F | ||||||||
| Chip | FTDI | ||||||||
| Device Port Connector | DB-9/M x 4 | ||||||||
| Data Transfer Speed | 230 kbps | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1.8 m | ||||||||
| Housing | Aluminum | ||||||||
| Interface | RS-232 | ||||||||
| LED | 4 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux: Kernel 1.5.0 or later |
|
|
|
|
|
|
UMC-102 ~Hot~
The USB to 2-port RS-232 Adapter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and 2 serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces. |
|
Supports automatic handshake mode; data transfer rate up to 230 kbps |
|
Supports remote wake-up and power-on-reset |
|
Supports ±15kV HBM ESD protection |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfer Speed | 230 kbps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | DB-9/M x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 0.6 m | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-232 | ||||||||
| LED | 5 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
|
UMC-201XS-300
The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces. |
|
Supports data transfer rate up to 230 kbps |
|
Supports remote wake-up and power-on-reset |
|
Supports ±15kV HBM ESD protection |
|
Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
UTS-232TC
The USB to RS-232 Adapter is a low-cost, high-performance cable. It operates as a bridge and provides easy connectivity between a USB Type-C port and a serial port. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.
|
Fully compliant with USB specification 1.1 and 2.0 |
|
Fully supports USB Type-C or Thunderbolt 3 |
|
Supports asynchronous serial interfaces |
|
Supports data transfer rate up to 230 kbps |
|
Supports ±15kV HBM ESD protection |
|
Supports remote wake-up and power management |
|
Compatible Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10, Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher |
| Model No. | UTS-232TC | ||||||||
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Upstream Connector | USB Type C Male | ||||||||
| Device Connector | DB-9 Male | ||||||||
| Data Transfer Rates | 230 kbps | ||||||||
| LED | 3 | ||||||||
| Power Mode | Bus Powered | ||||||||
| Cable Length | 0.5m | ||||||||
| Housing | Molding (PVC) | ||||||||
|
Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher |
|
Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher |
|
Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher |
|
|
|
|
|
|
UTS-232AD
The USB to serial adapter enables you to connect a RS-232 device to a smart phone or tablet with Android OS. Designed for mobility and integration into mixed environments such as Controlling instrumentation, Home automation, barcode scanning etc.; this portable and lightweight single cable solution is compatible with nearly all Android OS version 3.2 Honeycomb or later devices including the Samsung Galaxy Note®, Galaxy® S5, S4, S3, or S2, Google Nexus 7™, 5, or 4, and Motorola or HTC mobile devices.
Exception: serial mouse, or serial modem is not for application.
Exception: serial mouse, or serial modem is not for application.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Android OS Version 3.2 Honeycomb or later |
|
|
|
|
|
|
UMC-211 ~Hot~
The USB to RS-232 Bridge Converter converts a USB port into RS-232 serial port allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) Its cost-effective but high performance such like remote wake-up & power-on-reset is widely recommended by serial device manufacturers. For its high durability, hot plug-and-play operation, computer OS compatibility, via data transfer rate up to 250kbps; it is most applicable to industrial environments (no IRQs requirement) and simple desktop installations.
N.B.-ONLY PRODUCTS SOLD AFTER 1ST JAN 2013 COMPLIANT WITH WIN 8
N.B.-ONLY PRODUCTS SOLD AFTER 1ST JAN 2013 COMPLIANT WITH WIN 8
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports the full-duplex asynchronous serial device to USB host |
|
Supports Data Transfer Rate up to 250 kbps |
|
Supports remote wake-up and power-on-reset |
|
Supports ±15kV HBM ESD protection |
|
Compatible Windows OS 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Windows server 2008 / 2008R2 / 2012 or higher |
|
Compatible Mac OS 8.6 / 9.x / 10.x & Linux Redhat 7.3 / 8 / 9 or higher |
| Chip | Prolific | ||||||||
| Data transfer rate | 250 Kbps | ||||||||
| LED | 3 | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | DB-9 Pin Male | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1 m | ||||||||
| Housing | Molding (PVC) | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or later |
|
Windows server OS: 2008/2008R2/2012 or later |
|
Mac OS: 8.6/9.x/10.x or later |
|
Linux OS Red hat 7.3/8/9 or later |
|
|
|
|
|
.jpg) |
UMC-201 ~Hot~
The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces. |
|
Supports data transfer rate up to 230 kbps |
|
Supports remote wake-up and power-on-reset |
|
Supports ±15kV HBM ESD protection |
| Data Transfer Speed | 230 kbps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Device Port Connector | DB-9/M x 1 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1.1 m | ||||||||
| Housing | PVC | ||||||||
| Interface | RS-232 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or higher |
|
|
|
|
|
.jpg) |
UR-502ACT
Unlike passive extension cables, the USB 2.0 active extension cable is an active device that buffers the data going through to assure that signal always meets the USB 2.0 electrical and timing specifications. This USB 2.0 active extension cable can be use to extend the cable length of 5m to any USB 2.0 device. This USB active cable acts as a USB 2.0 Hub Therefore there is no driver required!
|
Extends and boosts the signal to any USB device supports data transfer speeds up to 480 Mbps |
|
Built-in repeater helps maintain Hi-Speed USB 2.0 signal quality, electrical and timing specifications |
|
Overcomes the 5 m (16 ft.) USB distance limitation ideal for connecting most USB printers, Scanner, PC Camera, Pen Drive, HDD Enclosure, Card Reader..,etc |
|
Provides a single, non daisy-chainable extension for maximum distance of 11 m (36 ft.) |
|
Plug and Play; compatible bus-powered requires no external power supply |
|
Power is delivered using 20 AWG Wires and Signal is boosted using USB 2.0 High-Speed Specification over 28AWG Wires |
|
Fully Compliant with USB specification 1.1 and 2.0 |
| Chips | NEC | ||||||||
| Cable Length | Max. 11 m | ||||||||
| Cable Wire Size | 20/28 AWG | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | USB Type B Male | ||||||||
| Data tranfer rate | 1.5/12/480 Mbps | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
UR-502
USB 2.0 Repeater cable is not a passive extension cable .It is an active device .The USB signals going through the extension cable are buffered to assure signal quality meeting the USB’s electrical and timing spec. Using passive cables for the purpose of extension will result in signal errors and is not recommended. This USB extension cable allows a USB device to have its cable length extend to 16 ft. This USB extension cable acts as a USB hub and buffers all downstream and upstream data traffic .High speed, full speed and low speed devices will function equally well with this USB extension cable.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports 480 Mbps high speed, 12 Mbps full speed and 1.5 Mbps low speed data transfer rate |
|
One upstream port and one downstream port |
|
Supports Plug & Play and hot - swapping functions |
|
Bus Powered Mode |
|
Support EHCI/UHCI/OHCI interface. |
|
Extend up to 25 meters by cascading up to 5 repeater cables |
| Data Transfer rate | 480/12/1.5 Mbps | ||||||||
| Chip | NEC | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | USB Type A Female | ||||||||
| Cable Wire Size | 20/28 AWG | ||||||||
| Cable Length | 5m | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98/Me/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
UR-502T ~Hot~
USB 2.0 Repeater cable is not a passive extension cable .It is an active device .The USB signals going through the extension cable are buffered to assure signal quality, meeting the USB’s electrical and timing spec. Using passive cables for the purpose of extension will result in signal errors and is not recommended. This USB extension cable allows a USB device to have its cable length extend to 16 ft. and also acts as a USB hub and buffers all downstream and upstream data traffic .High speed, full speed and low speed devices will function equally well with this USB extension cable.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports 480 Mbps High speed, 12Mbps Full Speed and 1.5Mbps Low Speed data transfer rate |
|
One upstream port and one downstream port |
|
Supports Plug & Play and hot –swapping functions |
|
Bus power mode |
|
EHCI/UHCI/OHCI interface. |
|
Extends up to 25 meters by cascading up to 5 repeater cables |
| Cable Length | 5m | ||||||||
| Chip | Terminus | ||||||||
| Cable wire size | 26/28 AWG | ||||||||
| Downstream connector | USB A Female | ||||||||
| Upstream connector | USB A Male | ||||||||
| Data transfer rate | 480/12/1.5 Mbps | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
LINK-SE2 ~New~
The USB 3.0 Data Link and KM Switch cable enables access multiple computers and associated monitors by sharing a single keyboard and mouse to switch between two computers. This product has the Data Link function allowing you to copy files on desktop between two computers. And it allows you move files quickly over USB 3.0, and works with Windows OS; to cut texts and paste them between computers.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows 7 / 8 / 8.1 / 10 or higher |
|
|
|
|
|
|
LINK-E2
USB Host-to-Host Bridge Cable is a low-cost and high-performance solution that provides bi-directional connectivity between two USB-compliant host systems. The PC users can inter-share data files with true plug-n-play and hot-swapping operation. Interaction can be accomplished in just seconds. LINK-E2 doesn’t need to install driver under Windows 2000/XP/Vista/7/8/8.1/10 or higher.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports Data Transfer Rate of up to 16 Mbps |
|
Supports Suspend and Resume Power Management |
|
Supports Remote Wake-Up Mode |
|
Transfer Files Directly between two (2) PCs or Laptop Computers using USB port |
|
Dual Data Buffer Supporting Two-Way Data Transfer |
|
Supports Bus Powered Mode |
| Chip | OTI | ||||||||
| USB Data Speed (Mbps) | 480/12/1.5 | ||||||||
| Data Transfer Rate | 16 Mbps | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector | USB Type A Male x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Operation Mode | Peer to Peer | ||||||||
| Cable Length | 2 m | ||||||||
|
Windows OS: 2000/XP/Vista/7/8/8.1/10 or higher |
|
|
|
|
|
.jpg) |
USB-322MS ~New~
The 2x2 USB 3.0 Hub Matrix Switch allows users share 2 USB devices between 2 different computers. It is USB 3.0 compliant, supports data transfer rate up to 5Gbps and backwards compatible with USB 2.0 and USB1.1. The unit is perfect for high-bandwidth devices, such as hard drive enclosure and USB docking stations or HD cameras. In addition, it also features push button or hotkey can select which computer needs to use the USB devices on Windows OS or push button switching on Mac OS. Supports memory function, the working memory won’t be terminated except restart the unit. With the compact and rugged shape design, you can create a space saving, convenient and productive work environment.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
USB 2.0: Windows 7 / 8 / 8.1 / 10; Mac OS 8.6 or higher |
|
USB 3.0: Windows 7 / 8 / 8.1 / 10; Mac OS X Mountain Lion or higher |
|
|
|
|
|
|