UTS-200J2
UTS-200J2 provides an extra connection for RS-422 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
 |
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate of up to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Chip | FTDI | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1M | ||||||||
| Interface | RS-422 | ||||||||
| LED | 3 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
 |
 |
 |
 |
 |
.jpg) |
UTS-200J
UTS-200J provides an extra connection for RS-422/485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| LED(s) | 3 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Power Mode | Bus powered | ||||||||
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Housing | Plastic | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Cable Length | 1M | ||||||||
| Interface | RS-422/485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
|
UTS-200J5
UTS-200J5 provides an extra connection for RS-485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
UTS-200系列 RoHS & REACH報告請連結下載https://www.hungturn.com.tw/webfiles/UTS-200JXS.rar .謝謝
UTS-200系列 RoHS & REACH報告請連結下載https://www.hungturn.com.tw/webfiles/UTS-200JXS.rar .謝謝
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides two (2) RJ-11 Female Phone Jack for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Chip | FTDI | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | RJ-11 6P4C/F x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1m | ||||||||
| Interface | RS-485 | ||||||||
| LED | 3 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485UI
USB to RS-485 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-485 peripherals such as POS and Industrial Control devices. USB to RS-485 adapter allows configuring such as Echo through application software. Termination Resistors and Bias can be set as good solution for saving time without manual setting. It supports USB Plug and Play; and serial port expansion. No IRQ, DMA, or I/O port resources required.
UTS-485UI更新報價如下，RoHS & REACH 報告請連結下載 https://www.hungturn.com.tw/DL/UTS-485UI_Report.rar，謝謝
UTS-485UI更新報價如下，RoHS & REACH 報告請連結下載 https://www.hungturn.com.tw/DL/UTS-485UI_Report.rar，謝謝
|
Echo mode/Bias resister/Terminal resister set up by Windows application program, Mac or Linux OS compliant. |
|
Supports Data transfers rate Up to 3M Baud |
|
Supports plug and play and hot swapping function |
|
No external power supply required |
|
Supports ±15Kv ESD protection (HBM) |
|
Allows single unit connecting up to 32 devices on the network |
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher. |
| Chip | FTDI | ||||||||
| Data Transfers Rate | Up to 3M Baud | ||||||||
| USB Specification | USB 1.1 / 2.0 compliant | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Device | 8P8C RJ-45 Male | ||||||||
| Cable Length | 1.8 m | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or later |
|
Linux OS: 1.5.0 or later |
|
|
|
|
 |
 |
UTS-485TB
USB to RS-485 adapter provides an extra serial COM port via USB connection and can be configured to work with RS-485 devices such as POS or industrially controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-485 data and control signals thru its terminal block. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without external power requirement.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 32 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher, Win CE, |
|
Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfer Rates | Up to 3M baud | ||||||||
| LED | 3 | ||||||||
| Host Port Connector | USB Type A Male | ||||||||
| Device Port Connector | Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Operating Temp. | 0 ℃ ~ 40 ℃ | ||||||||
| Storage Temp. | -20 ℃ ~ 60 ℃ | ||||||||
| Humidity | 0~80% RH, Non-condensing | ||||||||
| Interface | RS-485 | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-422TB
USB to RS-422 converter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. USB converter features a full set of RS-422 data and control signals on its terminal block connector. It supports data transfer rates of up to 3 Mbps. No external power supply is required as USB converter takes its power from the USB bus.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides four (4) Terminal Block Serial Port for Device Connection |
|
Data Transfer Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Short Circuit and Over-Current Protection |
|
Supports Bus Powered Mode |
| CHIP | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Connector Upstream | USB Type A/M | ||||||||
| Connector Downstream | Terminal Block x 5 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1m | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-422 | ||||||||
| LED | 3 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485X + DT485C
USB to RS-485 adapter provides an extra serial com port via USB connection and can be configured to work with RS-485 peripherals such as POS and industrial controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-485 data and control signals on its DB-9 or terminal block changer. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without requiring an external power adapter.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 256 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
|
Changer adapter from DB-9F to 5 Pins Terminal block |
| Chip | FTDI | ||||||||
| Data Transfers Rates | 300 to 3M baud | ||||||||
| Power Consumption | 56mA | ||||||||
| LED | 3 | ||||||||
| Environment Operating Temp | 0 ℃ ~ 40 ℃ | ||||||||
| Environment Storage Temp | -20 ℃ ~ 60 ℃ | ||||||||
| Environment Humidity | 0~80% RH, Non-condensing | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-485 | ||||||||
| Connector Host | USB Type A Male | ||||||||
| Connector Device | DB-9M/DB-9F to Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 or higher |
|
Windows server: 2003/2008/2008R2/2012/2012R2 or higher |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or higher |
|
Linux OS: Kernel 1.5.0 or later |
|
 |
|
|
|
.jpg) |
UTS-422X + DT422C
USB to RS-422 adapter provides an extra serial com port via USB connection and can be configured to work with RS-422 peripherals such as POS and industrial controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-422 data and control signals on its DB-9 or terminal block changer. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without requiring an external power adapter.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 256 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports the asynchronous serial interfaces |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Supports default ROM or external EEPROM for device configuration |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
|
Changer adapter from DB-9 to Terminal block |
| Chip | FTDI | ||||||||
| Data Transfers Rate | up to 3M baud | ||||||||
| Power Consumption | 56mA | ||||||||
| LED | 3 | ||||||||
| Environment Operating Temp. | 0 ℃ ~ 40 ℃ | ||||||||
| Environment Storage Temp. | -20 ℃ ~ 60 ℃ | ||||||||
| Environment Humidity | 0~80% RH, Non-condensing | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-422 | ||||||||
| Connector Host | USB Type A Male | ||||||||
| Connector Device | DB-9 / Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | Plastic | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 or higher |
|
Windows server: 2003/2008/2008R2/2012/2012R2 or higher |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x or higher |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-M12 ~Hot~
UTS-M12 provides 2 extra connections for RS-422/485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB Specification 1.1 and 2.0 |
|
Provides two (2) DB-9 Male Serial Port for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Chip | FTDI | ||||||||
| LED | 1 | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Device Port Connector | DB-9/M x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Interface | RS-422/485 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Housing | Plastic | ||||||||
| Cable Length | 0.6m | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-485 ~Hot~
UTS-485 provides an extra connection for RS-485 devices via any available USB port from any PC or Laptop Computers. It is compact, portable, and perfect for users who are always working with serial devices like PDA, Digital Camera, Modem, Cellular Phone, ISDN Terminal Adaptor, and etc.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides one (1) DB-9 Male Serial Port for Device Connection |
|
Data Transfers Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Bus Powered Mode |
| Chip | FTDI | ||||||||
| LED | 3 | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Host Port Connector | USB Type A/M | ||||||||
| Cable Length | 1.1M | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Housing | PVC | ||||||||
| Device Port Connector | DB-9/M x 1 | ||||||||
| Power Mode | Bus powered | ||||||||
| Interface | RS-485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |
UTS-422 ~Hot~
USB to RS-422 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. USB adapter features a full set of RS-422 data and control signals on its terminal block connector. It supports data transfer rates of up to 3 Mbps. No external power supply is required as USB adapter takes its power from the USB bus.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports the asynchronous serial interfaces |
|
Data transfers rate 300 to 3M baud |
|
Supports remote wake-up and power management |
|
Supports default ROM or external EEPROM for device configuration |
|
The system is equipped with USB Host Controller |
| Chip | FTDI | ||||||||
| Data transfers Rate | 300 to 3M baud | ||||||||
| LED | 3 | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Interface | RS-422 | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | DB-9 Male | ||||||||
| Power Mode | Bus powered | ||||||||
| Housing | PVC Molding | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V 4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |