UTS-485TB
USB to RS-485 adapter provides an extra serial COM port via USB connection and can be configured to work with RS-485 devices such as POS or industrially controlled devices. The USB adapter supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. The USB adapter features a full set of RS-485 data and control signals thru its terminal block. It supports data transfer rates of up to 3M baud. It receives full power via the host USB connection, and provides power to the attached serial device without external power requirement.
 |
Fully Compliant with USB specification 1.1 and 2.0 |
|
Allows up to 32 nodes on the bus |
|
±15kV HBM ESD Protected |
|
Supports data transfer rates up to 3M baud |
|
Supports remote wake-up and power-on-reset |
|
Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher, Win CE, |
|
Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher |
| Chip | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfer Rates | Up to 3M baud | ||||||||
| LED | 3 | ||||||||
| Host Port Connector | USB Type A Male | ||||||||
| Device Port Connector | Terminal Block | ||||||||
| Power Mode | Bus powered | ||||||||
| Operating Temp. | 0 ℃ ~ 40 ℃ | ||||||||
| Storage Temp. | -20 ℃ ~ 60 ℃ | ||||||||
| Humidity | 0~80% RH, Non-condensing | ||||||||
| Interface | RS-485 | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-485 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
 |
 |
 |
 |
 |
.jpg) |
UTS-422TB
USB to RS-422 converter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. USB converter features a full set of RS-422 data and control signals on its terminal block connector. It supports data transfer rates of up to 3 Mbps. No external power supply is required as USB converter takes its power from the USB bus.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Provides four (4) Terminal Block Serial Port for Device Connection |
|
Data Transfer Rate 300 to 3M bps |
|
Supports Remote Wake-Up and Power Management |
|
Supports Hot-Swapping for a Quick Switch in Serial Devices without Shutting Down your PC |
|
Supports Short Circuit and Over-Current Protection |
|
Supports Bus Powered Mode |
| CHIP | FTDI | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Data Transfers Speed | 300 to 3M bps | ||||||||
| Connector Upstream | USB Type A/M | ||||||||
| Connector Downstream | Terminal Block x 5 | ||||||||
| Power Mode | Bus powered | ||||||||
| Cable Length | 1m | ||||||||
| Housing | Plastic | ||||||||
| Interface | RS-422 | ||||||||
| LED | 3 | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2 |
|
WinCE OS: V4.2 ~ V7.0 |
|
Mac OS: 8.6/9.x/10.x |
|
Linux OS: Kernel 1.5.0 or later |
|
|
|
|
|
.jpg) |