Industrial Isolated USB to RS-232 Extender

UTS-i102

The Isolated USB to 2-Port RS-232 Cat.5 extender is a low cost and durable serial solution that will extend your RS-232 via a single standard Cat.5 / 5e / 6 UTP cable. It features 2.5kV isolation to ensure sensitive controls and devices for long extending serial signal won’t be damaged. The Extender set provides full-duplex remote access and control of any RS-232 protocol device. The isolated USB to 2-Port RS-232 Cat.5 extender kit consists of a local transmitter and 2 remote receivers. Allows you placing RS-232 devices in any location you want and to control them remotely up to 2000 meters (6600 feet).

Compatible with all RS-232 protocols

Extend RS-232 peripherals up to 2000 meters upon transfer rate at 115kbps. (1700m upon 230kbps; 700m upon 921.6kbps)

Fully Compliant with USB specification 1.1 and 2.0

Supports transfer rate up to 921.6kbps

Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops

Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection

Supports 2.5kV Isolation; Bus powered for local transmitter, external power for remote receiver

Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2; Mac OS 8.6, Linux 1.5.0 or higher

Rugged & cambered Aluminum shell and wall mountable

	Model No.			UTS-i102

	Chip			FTDI

	Unit Category			Transmitter x 1 & Receiver x 2

	Connector Transmitter Host			USB Type B Female x 1

	Connector Transmitter Output			RJ-45 Female x 2

	Connector Receiver Input			RJ-45 Female

	Connector Receiver Device			DB-9 Male

	Interconnection Cable			Standard Cat.5 / 5e / 6

	LED Transmitter			5 ( 2TX / 2RX / ACT )

	LED Receiver			3 ( TX / RX / PWR )

	Power Mode Transmitter			Bus powered

	Power Mode Receiver			External power adapter (DC5V)

	Operating/Storage Temperature			-40 to 85°C (-40 to 185°F)

	Housing			Aluminum

	Dimension ( L x W x H ) Tx			130 x 74 x 30mm

	Dimension ( L x W x H ) Rx			90 x 73 x 31mm

	Windows XP SP3/Vista/7/8/8.1/10 or higher
	Windows Server 2003/2008/2008R2/2012/2012R2 or higher
	Mac OS 8.6/9.x/10.x or higher
	Linux Kernel 1.5.0 or higher

See Larger Image

UTS-i101

The Isolated USB to RS-232 Cat.5 extender is a low cost and durable serial solution that will extend your RS-232 via a single standard Cat.5 / 5e / 6 UTP cable. It features 2.5kV isolation to ensure sensitive controls and devices for long extending serial signal won’t be damaged. It provides full-duplex remote access and control of any RS-232 protocol device. The isolated USB to RS-232 Cat.5 extender kit consists of a local transmitter and remote receiver. Allows you placing RS-232 devices in any location you want and to control them remotely up to 2000 meters (6600 feet).