竤騰實業有限公司 HungTurn

UMC-201XS-300

The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces.

Supports data transfer rate up to 230 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux OS: Kernel 1.5.0 or higher

See Larger Image

UTS-232TC

The USB to RS-232 Adapter is a low-cost, high-performance cable. It operates as a bridge and provides easy connectivity between a USB Type-C port and a serial port. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully compliant with USB specification 1.1 and 2.0

Fully supports USB Type-C or Thunderbolt 3

Supports asynchronous serial interfaces

Supports data transfer rate up to 230 kbps

Supports ±15kV HBM ESD protection

Supports remote wake-up and power management

Compatible Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10, Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher

	Model No.			UTS-232TC

	Chip			FTDI

	USB Specification			USB 1.1 / 2.0 compliant

	Upstream Connector			USB Type C Male

	Device Connector			DB-9 Male

	Data Transfer Rates			230 kbps

	LED			3

	Power Mode			Bus Powered

	Cable Length			0.5m

	Housing			Molding (PVC)

	Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher
	Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher

See Larger Image

UTS-232AD

The USB to serial adapter enables you to connect a RS-232 device to a smart phone or tablet with Android OS. Designed for mobility and integration into mixed environments such as Controlling instrumentation, Home automation, barcode scanning etc.; this portable and lightweight single cable solution is compatible with nearly all Android OS version 3.2 Honeycomb or later devices including the Samsung Galaxy Note®, Galaxy® S5, S4, S3, or S2, Google Nexus 7™, 5, or 4, and Motorola or HTC mobile devices.

Exception: serial mouse, or serial modem is not for application.

Fully Compliant with USB specification 1.1 and 2.0

USB to Straight-Through RS-232 DB9 Serial Adapter for Android

Supports data transfer rate up to 230 kbps; or up to 115kbps with no flow control

Standard UART interface (RX, TX, RTS, CTS and GND pins)

UART TX buffer size is 256 bytes, UART RX buffer size is 5512 bytes

Supports ±15kV HBM ESD Protection

Supports OTG (On-The-Go) mode but no external OTG cable is required

Powers and charges the connected Android device, USB-powered via PC USB port, USB wall charger, or USB mobile battery pack

Compatible with Android OS Version 3.2 Honeycomb or later (Suitable for use on any Android platform supporting Android open Accessory Mode)

	Chip			FTDI

	USB Specification			USB 1.1 / 2.0 compliant

	Upstream Connector			USB Type A Male X 1; USB Micro-B Male X 1

	Device Connector			DB-9 Male

	Data Transfer Rates			Up to 230 kbps

	LED			3

	Power Mode			Bus Powered

	USB Micro B/M Cable Length			1.1m

	USB A/M Cable Length			0.3m

	Housing			Plastic

Android OS Version 3.2 Honeycomb or later

See Larger Image

UMC-211 ~Hot~

The USB to RS-232 Bridge Converter converts a USB port into RS-232 serial port allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) Its cost-effective but high performance such like remote wake-up & power-on-reset is widely recommended by serial device manufacturers. For its high durability, hot plug-and-play operation, computer OS compatibility, via data transfer rate up to 250kbps; it is most applicable to industrial environments (no IRQs requirement) and simple desktop installations.

N.B.-ONLY PRODUCTS SOLD AFTER 1ST JAN 2013 COMPLIANT WITH WIN 8

Fully Compliant with USB specification 1.1 and 2.0

Supports the full-duplex asynchronous serial device to USB host

Supports Data Transfer Rate up to 250 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

Compatible Windows OS 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Windows server 2008 / 2008R2 / 2012 or higher

Compatible Mac OS 8.6 / 9.x / 10.x & Linux Redhat 7.3 / 8 / 9 or higher

	Chip			Prolific

	Data transfer rate			250 Kbps

	LED			3

	Connector Upstream			USB Type A Male

	Connector Device			DB-9 Pin Male

	Power Mode			Bus powered

	Cable Length			1 m

	Housing			Molding (PVC)

	USB Specification			USB 1.1/2.0 compliant

	Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or later
	Windows server OS: 2008/2008R2/2012 or later
	Mac OS: 8.6/9.x/10.x or later
	Linux OS Red hat 7.3/8/9 or later

See Larger Image

UMC-201 ~Hot~

The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces.

Supports data transfer rate up to 230 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	Data Transfer Speed			230 kbps

	Host Port Connector			USB Type A/M

	Chip			FTDI

	USB Specification			USB 1.1/2.0 compliant

	Device Port Connector			DB-9/M x 1

	Power Mode			Bus powered

	Cable Length			1.1 m

	Housing			PVC

	Interface			RS-232

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux OS: Kernel 1.5.0 or higher

Home ﹥ Products > • USB > USB to RS-232 Adapter > DB-9 Male

UMC-201XS-300

UTS-232TC

UTS-232AD

UMC-211 ~Hot~

UMC-201 ~Hot~

Home

Products