UR-502ACT
Unlike passive extension cables, the USB 2.0 active extension cable is an active device that buffers the data going through to assure that signal always meets the USB 2.0 electrical and timing specifications. This USB 2.0 active extension cable can be use to extend the cable length of 5m to any USB 2.0 device. This USB active cable acts as a USB 2.0 Hub Therefore there is no driver required!
 |
Extends and boosts the signal to any USB device supports data transfer speeds up to 480 Mbps |
|
Built-in repeater helps maintain Hi-Speed USB 2.0 signal quality, electrical and timing specifications |
|
Overcomes the 5 m (16 ft.) USB distance limitation ideal for connecting most USB printers, Scanner, PC Camera, Pen Drive, HDD Enclosure, Card Reader..,etc |
|
Provides a single, non daisy-chainable extension for maximum distance of 11 m (36 ft.) |
|
Plug and Play; compatible bus-powered requires no external power supply |
|
Power is delivered using 20 AWG Wires and Signal is boosted using USB 2.0 High-Speed Specification over 28AWG Wires |
|
Fully Compliant with USB specification 1.1 and 2.0 |
| Chips | NEC | ||||||||
| Cable Length | Max. 11 m | ||||||||
| Cable Wire Size | 20/28 AWG | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | USB Type B Male | ||||||||
| Data tranfer rate | 1.5/12/480 Mbps | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
 |
 |
 |
.jpg) |
 |
|
UR-502
USB 2.0 Repeater cable is not a passive extension cable .It is an active device .The USB signals going through the extension cable are buffered to assure signal quality meeting the USB’s electrical and timing spec. Using passive cables for the purpose of extension will result in signal errors and is not recommended. This USB extension cable allows a USB device to have its cable length extend to 16 ft. This USB extension cable acts as a USB hub and buffers all downstream and upstream data traffic .High speed, full speed and low speed devices will function equally well with this USB extension cable.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports 480 Mbps high speed, 12 Mbps full speed and 1.5 Mbps low speed data transfer rate |
|
One upstream port and one downstream port |
|
Supports Plug & Play and hot - swapping functions |
|
Bus Powered Mode |
|
Support EHCI/UHCI/OHCI interface. |
|
Extend up to 25 meters by cascading up to 5 repeater cables |
| Data Transfer rate | 480/12/1.5 Mbps | ||||||||
| Chip | NEC | ||||||||
| Connector Upstream | USB Type A Male | ||||||||
| Connector Downstream | USB Type A Female | ||||||||
| Cable Wire Size | 20/28 AWG | ||||||||
| Cable Length | 5m | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98/Me/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
UR-502T ~Hot~
USB 2.0 Repeater cable is not a passive extension cable .It is an active device .The USB signals going through the extension cable are buffered to assure signal quality, meeting the USB’s electrical and timing spec. Using passive cables for the purpose of extension will result in signal errors and is not recommended. This USB extension cable allows a USB device to have its cable length extend to 16 ft. and also acts as a USB hub and buffers all downstream and upstream data traffic .High speed, full speed and low speed devices will function equally well with this USB extension cable.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports 480 Mbps High speed, 12Mbps Full Speed and 1.5Mbps Low Speed data transfer rate |
|
One upstream port and one downstream port |
|
Supports Plug & Play and hot –swapping functions |
|
Bus power mode |
|
EHCI/UHCI/OHCI interface. |
|
Extends up to 25 meters by cascading up to 5 repeater cables |
| Cable Length | 5m | ||||||||
| Chip | Terminus | ||||||||
| Cable wire size | 26/28 AWG | ||||||||
| Downstream connector | USB A Female | ||||||||
| Upstream connector | USB A Male | ||||||||
| Data transfer rate | 480/12/1.5 Mbps | ||||||||
| Power Mode | Bus powered | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
|
Windows OS: 98SE/Me/2000/XP/Vista/7/8/8.1/10 |
|
Mac OS: 8.6/9.x/10.x |
|
|
|
.jpg) |
|
|
LINK-SE2 ~New~
The USB 3.0 Data Link and KM Switch cable enables access multiple computers and associated monitors by sharing a single keyboard and mouse to switch between two computers. This product has the Data Link function allowing you to copy files on desktop between two computers. And it allows you move files quickly over USB 3.0, and works with Windows OS; to cut texts and paste them between computers.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Windows 7 / 8 / 8.1 / 10 or higher |
|
 |
|
 |
|
 |
LINK-E2
USB Host-to-Host Bridge Cable is a low-cost and high-performance solution that provides bi-directional connectivity between two USB-compliant host systems. The PC users can inter-share data files with true plug-n-play and hot-swapping operation. Interaction can be accomplished in just seconds. LINK-E2 doesn’t need to install driver under Windows 2000/XP/Vista/7/8/8.1/10 or higher.
|
Fully Compliant with USB specification 1.1 and 2.0 |
|
Supports Data Transfer Rate of up to 16 Mbps |
|
Supports Suspend and Resume Power Management |
|
Supports Remote Wake-Up Mode |
|
Transfer Files Directly between two (2) PCs or Laptop Computers using USB port |
|
Dual Data Buffer Supporting Two-Way Data Transfer |
|
Supports Bus Powered Mode |
| Chip | OTI | ||||||||
| USB Data Speed (Mbps) | 480/12/1.5 | ||||||||
| Data Transfer Rate | 16 Mbps | ||||||||
| USB Specification | USB 1.1/2.0 compliant | ||||||||
| Connector | USB Type A Male x 2 | ||||||||
| Power Mode | Bus powered | ||||||||
| Operation Mode | Peer to Peer | ||||||||
| Cable Length | 2 m | ||||||||
|
Windows OS: 2000/XP/Vista/7/8/8.1/10 or higher |
|
|
|
|
|
.jpg) |