竤騰實業有限公司 HungTurn

UTS-232X45

The USB to RS-232 Adapter is a low-cost, high-performance cable. It operates as a bridge and provides easy connectivity between a USB port and a serial port. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB specification 1.1 and 2.0

Supports asynchronous serial interfaces

Supports data transfer rate up to 230 kbps

Supports ±15kV HBM ESD protection

Supports remote wake-up and power-on-reset

Compatible with Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher; Mac OS 8.6 / 9.x / 10.x, Linux 1.5.0 or higher.

	Model No.			UTS-232X45

	Chip			FTDI

	Data Transfer Rate			Up to 230kbps

	USB Specification			USB 1.1/2.0 compliant

	Connector Upstream			USB Type A Male

	Connector Device			8P8C RJ-45 Male

	Cable Length			1.8 m

	Power Mode			Bus Powered

	Housing			Plastic

	Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher
	Win CE, Windows server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Mac OS 8.6 / 9.x / 10.x or higher
	Linux 1.5.0 or higher

See Larger Image

UTS-6232i

The Industrial Isolated 6-Port USB to RS-232 adapter features 2.5kV isolation to ensure 6 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply installs the drivers, connect the 6-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Additionally, the isolated adapter is bus-powered to eliminate the need for an external power adapter or wall outlet.

Full compliance with the USB Specification 2.0 & 1.1

Compatible with all RS-232 protocols

Supports transfer rate up to 230 kbps

Supports 2.5kV Isolation

Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops

Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection

Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Mac OS 8.6, Linux 1.5.0 or higher

Rugged & cambered Aluminum shell and wall mountable

	Model No.			UTS-6232i

	Chip			FTDI

	Data Rate			230 Kbps

	LED			13 ( 6TX / 6RX / ACT )

	Connector Host			USB Type B Female x 1

	Connector RS-232 Out			DB-9 Male x 6

	USB Specification			USB 1.1 / 2.0 compliant

	Operating/Storage Temperature			-40 to 85°C (-40 to 185°F)

	Power Mode			Bus Powered

	Housing			Aluminum

	Dimension ( L x W x H )			170 x 94.5 x 30mm

	Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher
	Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Mac OS 8.6, Linux 1.5.0 or higher

See Larger Image

UTS-3232i

The Industrial Isolated USB to 3-Port RS-232 adapter features 2.5kV isolation to ensure 3 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply installs the drivers, connect the 3-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Additionally, the isolated adapter is bus-powered to eliminate the need for an external power adapter or wall outlet.

Full compliance with the USB Specification 2.0 & 1.1

Compatible with all RS-232 protocols

Supports transfer rate up to 230 kbps

Supports 2.5kV Isolation

Supports ±15kV (air), ±8kV (contact) ESD protection; Isolated ground loops

Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection

Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Mac OS 8.6, Linux 1.5.0 or higher

Rugged & cambered Aluminum shell and wall mountable

	Model No.			UTS-3232i

	Chip			FTDI

	Data Rate			230 Kbps

	LED			7 ( 3TX / 3RX / ACT )

	Connector Host			USB Type B Female x 1

	Connector RS-232 Out			DB-9 Male x 3

	USB Specification			USB 1.1 / 2.0 compliant

	Operating/Storage Temperature			-40 to 85°C (-40 to 185°F)

	Power Mode			Bus Powered

	Housing			Aluminum

	Dimension ( L x W x H )			170 x 94.5 x 30mm

	Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher
	Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Mac OS 8.6, Linux 1.5.0 or higher

See Larger Image

UTS-112

The Industrial 12-Port USB to RS-232 adapter features to ensure 12 serial devices by DB-9 port connected require long range or multi-drop capabilities won’t be damaged between the PC and serial applications. Simply install the drivers, connect the 12-Port Serial adapter to your computer, plug in your serial devices, and you’re ready to go. Programming is not required, and you do not need to worry about IRQs, configuring aboard, power requirements, or connection schemes. Maximum 48 serial devices can be connected under cascading 4 units.

Full compliance with the USB Specification 2.0 & 1.1

Compatible with all RS-232 protocols

Supports transfer rate up to 230 kbps

Supports USB branching up to 3 tire levels (max. 48 devices connection)

Supports ±15kV (air), ±8kV (contact) ESD protection

Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection

Compatible with Windows XP SP3 / Vista / 7 / 8 / 8.1, 10; Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Mac OS 8.6, Linux 1.5.0 or higher

Rugged & cambered metal shell and wall mountable

	Model No.			UTS-112

	Chip			FTDI

	Data Rate			230 Kbps

	LED on each port			3 ( TX / RX / ACT )

	Connector Host			USB Type B Female x 1

	Connector Daisy-Chain			USB Type A Female x 1

	Connector RS-232 Out			DB-9 Male x 12

	USB Specification			USB 1.1 / 2.0 compliant

	Operating/Storage Temperature			-40 to 85°C (-40 to 185°F)

	Humidity			0–80% RH, Non-condensing

	Power Mode			External power adapter

	Power Consumption			DC5V

	Housing			Metal

	Dimension ( L x W x H )			268 x 102 x 40 mm

	Unit Weight			1,033g

	Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 or higher
	Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Mac OS 8.6, Linux 1.5.0 or higher

See Larger Image

UMC-104 ~Hot~

The USB to 4 Ports RS-232 Adapter converts a single USB port into four RS-232 serial ports allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) A cost-effective but high performance, with metal (Aluminum) construction, it provides versatile connections and a robust solution for both harsh industrial environments (no IRQs requirement) and simple desktop installations.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces

Supports data transfer rate up to 230 kbps.

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	USB Specification			USB 1.1/2.0 compliant

	Host Port Connector			USB Type B/F

	Chip			FTDI

	Device Port Connector			DB-9/M x 4

	Data Transfer Speed			230 kbps

	Power Mode			Bus powered

	Cable Length			1.8 m

	Housing			Aluminum

	Interface			RS-232

	LED			4

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux: Kernel 1.5.0 or later

See Larger Image

UMC-102 ~Hot~

The USB to 2-port RS-232 Adapter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and 2 serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces.

Supports automatic handshake mode; data transfer rate up to 230 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	Chip			FTDI

	USB Specification			USB 1.1/2.0 compliant

	Data Transfer Speed			230 kbps

	Host Port Connector			USB Type A/M

	Device Port Connector			DB-9/M x 2

	Power Mode			Bus powered

	Cable Length			0.6 m

	Housing			Plastic

	Interface			RS-232

	LED			5

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux OS: Kernel 1.5.0 or later

See Larger Image

UMC-201XS-300

The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces.

Supports data transfer rate up to 230 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux OS: Kernel 1.5.0 or higher

See Larger Image

UTS-232TC

The USB to RS-232 Adapter is a low-cost, high-performance cable. It operates as a bridge and provides easy connectivity between a USB Type-C port and a serial port. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully compliant with USB specification 1.1 and 2.0

Fully supports USB Type-C or Thunderbolt 3

Supports asynchronous serial interfaces

Supports data transfer rate up to 230 kbps

Supports ±15kV HBM ESD protection

Supports remote wake-up and power management

Compatible Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10, Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2, Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher

	Model No.			UTS-232TC

	Chip			FTDI

	USB Specification			USB 1.1 / 2.0 compliant

	Upstream Connector			USB Type C Male

	Device Connector			DB-9 Male

	Data Transfer Rates			230 kbps

	LED			3

	Power Mode			Bus Powered

	Cable Length			0.5m

	Housing			Molding (PVC)

	Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 or higher
	Windows Server 2003 / 2008 / 2008R2 / 2012 / 2012R2 or higher
	Win CE, Mac OS 8.6, Linux Kernel 1.5.0 or higher

See Larger Image

UTS-232AD

The USB to serial adapter enables you to connect a RS-232 device to a smart phone or tablet with Android OS. Designed for mobility and integration into mixed environments such as Controlling instrumentation, Home automation, barcode scanning etc.; this portable and lightweight single cable solution is compatible with nearly all Android OS version 3.2 Honeycomb or later devices including the Samsung Galaxy Note®, Galaxy® S5, S4, S3, or S2, Google Nexus 7™, 5, or 4, and Motorola or HTC mobile devices.

Exception: serial mouse, or serial modem is not for application.

Fully Compliant with USB specification 1.1 and 2.0

USB to Straight-Through RS-232 DB9 Serial Adapter for Android

Supports data transfer rate up to 230 kbps; or up to 115kbps with no flow control

Standard UART interface (RX, TX, RTS, CTS and GND pins)

UART TX buffer size is 256 bytes, UART RX buffer size is 5512 bytes

Supports ±15kV HBM ESD Protection

Supports OTG (On-The-Go) mode but no external OTG cable is required

Powers and charges the connected Android device, USB-powered via PC USB port, USB wall charger, or USB mobile battery pack

Compatible with Android OS Version 3.2 Honeycomb or later (Suitable for use on any Android platform supporting Android open Accessory Mode)

	Chip			FTDI

	USB Specification			USB 1.1 / 2.0 compliant

	Upstream Connector			USB Type A Male X 1; USB Micro-B Male X 1

	Device Connector			DB-9 Male

	Data Transfer Rates			Up to 230 kbps

	LED			3

	Power Mode			Bus Powered

	USB Micro B/M Cable Length			1.1m

	USB A/M Cable Length			0.3m

	Housing			Plastic

Android OS Version 3.2 Honeycomb or later

See Larger Image

UMC-211 ~Hot~

The USB to RS-232 Bridge Converter converts a USB port into RS-232 serial port allowing you to connect to monitor and control your serial devices. (Works with digital camera, cell phone, PDA, modem, mouse, PDA, GPS, ISDN terminal adapter etc.) Its cost-effective but high performance such like remote wake-up & power-on-reset is widely recommended by serial device manufacturers. For its high durability, hot plug-and-play operation, computer OS compatibility, via data transfer rate up to 250kbps; it is most applicable to industrial environments (no IRQs requirement) and simple desktop installations.

N.B.-ONLY PRODUCTS SOLD AFTER 1ST JAN 2013 COMPLIANT WITH WIN 8

Fully Compliant with USB specification 1.1 and 2.0

Supports the full-duplex asynchronous serial device to USB host

Supports Data Transfer Rate up to 250 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

Compatible Windows OS 98SE / ME / 2000 / XP / Vista / 7 / 8 / 8.1 / 10; Windows server 2008 / 2008R2 / 2012 or higher

Compatible Mac OS 8.6 / 9.x / 10.x & Linux Redhat 7.3 / 8 / 9 or higher

	Chip			Prolific

	Data transfer rate			250 Kbps

	LED			3

	Connector Upstream			USB Type A Male

	Connector Device			DB-9 Pin Male

	Power Mode			Bus powered

	Cable Length			1 m

	Housing			Molding (PVC)

	USB Specification			USB 1.1/2.0 compliant

	Windows OS: 98SE/ME/2000/XP/Vista/7/8/8.1/10 or later
	Windows server OS: 2008/2008R2/2012 or later
	Mac OS: 8.6/9.x/10.x or later
	Linux OS Red hat 7.3/8/9 or later

See Larger Image

UMC-201 ~Hot~

The USB to Serial Bridge Converter is a low-cost, high-performance device. It operates as a bridge and provides easy connectivity between one USB port and serial ports. The serial port can be configured as an asynchronous UART interface and can support flow control. It is designed to be compliant with a variety of applications, including COM port replication, and is ideally suited for many peripherals like POS terminals, Barcode readers, Printers, Gaming consoles, Medical devices, Modem, Serial Mouse, Industrial meters, PDA, GPS, etc.

Fully Compliant with USB Specification 1.1 and 2.0

Supports the asynchronous serial interfaces.

Supports data transfer rate up to 230 kbps

Supports remote wake-up and power-on-reset

Supports ±15kV HBM ESD protection

	Data Transfer Speed			230 kbps

	Host Port Connector			USB Type A/M

	Chip			FTDI

	USB Specification			USB 1.1/2.0 compliant

	Device Port Connector			DB-9/M x 1

	Power Mode			Bus powered

	Cable Length			1.1 m

	Housing			PVC

	Interface			RS-232

	Windows OS: 98SE/Me/2000/XP/Vista/7/ 8/8.1/10; Windows Server 2003/2008/2008R2/2012/2012R2
	WinCE OS: V4.2 ~ V7.0
	Mac OS: 8.6/9.x/10.x
	Linux OS: Kernel 1.5.0 or higher

Home ﹥ Products > • USB > USB to RS-232 Adapter

UTS-232X45

UTS-6232i

UTS-3232i

UTS-112

UMC-104 ~Hot~

UMC-102 ~Hot~

UMC-201XS-300

UTS-232TC

UTS-232AD

UMC-211 ~Hot~

UMC-201 ~Hot~

Home

Products